How to carry out regular maintenance and maintenance of the cans sealing machine?

The production efficiency of the can sealing machine is 2 to 3 times that of the semi-automatic sealing machine, and due to the use of the fully automatic lower cover and can sealing device, it saves labor costs and improves the production efficiency. Solve many problems in the market, especially can be used in conjunction with other equipment to form a large-scale cans filling production line, this production line can quickly meet market demand and increase the rapid production of enterprises. This equipment is not only limited to these types of products, it is very versatile, mainly suitable for the sealing of various round cans such as tinplate cans, aluminum cans, paper cans, etc. The operation is simple and easy to learn. The can sealing machine is Ideal equipment for food, beverage, pharmaceutical, chemical and other industries.

Maintenance of can sealing machine:
1. The gap between the indenter and the sealing wheel: can be adjusted according to the hardness of the cover. The iron cover can be adjusted closer. The aluminum cover can be adjusted farther away. After the adjustment, tighten the fixing screws and try to seal 2-3 pieces. After checking to meet the standard, you can work continuously.
2. Adjust the distance between the indenter and the sealing wheel: adjust the left and right distance between the indenter and the sealing wheel, based on the distance between the sealing wheel and the indenter 0.5mm, the indenter and the sealing wheel do not rub each other, the smaller the distance The better; adjust the up and down distance between the pressure head of the can sealing machine and the road sealing wheel, the lower end of the sealing wheel and the upper end of the pressure head are subject to a small gap that does not contact. Next, adjust the distance between the indenter and the second sealing wheel in the same way.
3. Adjust the distance between the tray and the pressure head: Loosen the spare cap on the lower guide shaft (screw) of the tray, rotate the tray, take the contact between the pressure head and the lid as the base point, and then move the tray Rotate 2--3mm upward to tighten the spare cap.
4. Mechanical maintenance: The motor of the can-sealing machine is indispensable, the gear transmission part is charged with lithium-based lubricant once a month, the motor spindle runs and the support tray does not rise and fall, adjust or replace the triangle belt.
5. Each time you change the tank type, you need to replace the indenter and the tray according to the size of the cover.